DN Disneyland ® Neverland
Prototype Pressed Coin Guide

DN0001 Mickey Rays / Mickey Sunburst The First Disney elongated coin design. Horizontal pressed penny image. DISNEYLAND ® , Classic outlined image of Mickey’s face "hollow outlined ears" with rays, © DISNEY dot border grip on right side. Earliest known Disney elongated coin type ever made. (Centek prototype.) This coin very similar in design to DL0001, DL0005, DL0007, and DL0019. Circa late 1985 to early 1986. No stampbacked examples known. (No Disney elongated coins pressed before 2004 are known to have stampbacks.) This Disney coin was pressed from a prototype die designed for use in a machine type that preceded the first installed Disneyland penny presses and the Disneyland generation Centek single play machines. Examples of this coin are known in only a few collections as of 2020. Die status is reported as open. Extremely scarce. (This Disneyland pressed coin number made with the possibly now canceled #DNP0001.0.0 obverse elongated coin die in its original "0" state / variation, paired with a blank "0" reverse coin die.) Larger prototype elongated coin image in frame or window # 1   2   3 or Giant Image.
Related: Mickey Rays pressed pennies page, scarce or rare Disneyland pressed pennies and our elongated coin comparison page.

DN0002 Nifty Nineties Mickey / Straw Hat Mickey Pressed Coin. Vertical pressed coin image. MICKEY MOUSE , Mickey Mouse in a 1890’s style suit, standing, full length, full face, head cocked to one side, tipping his straw hat with his left hand, dot border, DISNEYLAND ® , © 1986 THE WALT DISNEY CO. Per the machine owner, this die was made in November of 1986.No stampbacked examples known. (No Disney elongated coins pressed before 2004 are known to have stampbacks.) This Disney coin is often called the "Straw Hat Mickey" or "Nifty Nineties Mickey". Mickey Mouse is in 1890’s summer clothing, as in the 1941 Disney short, The Nifty Nineties. Interviews by Robert Hoff of ParkPennies.com with key people close to this prototype, suggest that Vance Fowler of The Cimeter Group hoped that an agreement covering this coin in a Cimeter machine would be received and accepted by Disneyland. David P., a relative of the Cimeter CEO and business partner eventually presented the DN0003. The DN0002 / DN0003 artwork is well executed and in high relief. (For examples featuring the dates 1928 to the left of Mickey and 1988 to right, please refer to DN0003.) Examples pressed circa 1986-7 on both copper and zinc cents are known to exist and most likely number less than 10 in total. Die status has been reported as open by two trusted sources. Extremely scarce as of this 2020 update. Reported as held by only a few advanced collectors as of 2020. (This Disneyland pressed coin number made with the possibly now canceled #DNP0002.0.0 obverse elongated coin die in its original "0" state / variation, paired with a blank "0" reverse coin die.) Larger prototype elongated coin image in frame or window # 1   2   3
Related: Our scarce or rare Disneyland pressed pennies and elongated coins page.

DN0003 Dated Nifty Nineties Mickey / Straw Hat Mickey Pressed Coin. Vertical pressed penny image. MICKEY MOUSE , 1928 Mickey Mouse in a 1890’s style suit, standing, full length, full face, head cocked to one side, tipping his straw hat with his left hand, 1988, DISNEYLAND ®, dot border, © 1988 THE WALT DISNEY CO. For examples without the dates 1928 to the left of Mickey and 1988 to the right, please refer to the DN0002. This die was engraved between 1987 and 1989. No stampbacked examples known. (No Disney elongated coins pressed before 2004 are known to have stampbacks.) Image courtesy of the N. Wooten collection. This Disney coin is often called the "Dated Straw Hat Mickey" or "Dated Nifty Nineties Mickey". Mickey Mouse is in 1890’s summer clothing, as in the 1941 Disney short, The Nifty Nineties. Interviews by Robert Hoff of ParkPennies.com with key people close to this prototype suggest that Vance Fowler's company, The Cimeter Group, proposed this coin / machine to Disneyland Management via a California based company representative. However, according to a principal, negotiations broke down over Disney demands and the machine was never placed onstage. The artwork is well executed especially for its time and done in high relief. (For examples without the dates 1928 to the left of Mickey and 1988 to right, please refer to DN0002.) In 2000, die status was reported to Robert Hoff of ParkPennies by a trusted knowledgeable source as lost / destroyed. Again in 2005 and 2012, this die was confirmed as lost / destroyed by the original owner / engraver. Known examples of this coin are scarce. In 2006, a picture of the left and right prototype Disneyland penny press marquees from the original machine, each featuring a DN0003 was made public via an email to select collectors. A few additional examples are known. Extremely scarce. Mr. Fowler has stated that "not more than a dozen or so were run". Possibly six of them are known to have survived as of this update in 2015. (This Disneyland pressed coin number made with the possibly now canceled #DNP0003.0.0 obverse elongated coin die in its original "0" state / variation, paired with a blank "0" reverse coin die.) Larger prototype elongated coin image in frame or window # 1   2   3

DN0004 Double Band MICKEY 60 YEARS prototype pressed penny. Horizontal penny image. MICKEY 60 YEARS, lines above and below 60 Years, ("Double Band") Mickey Mouse standing, DISNEYLAND, grip arcs over 5 dots in the dot border. Very similar to the DL0003. Believed to date back to 1988. No stampbacked examples known. (No Disney elongated coins pressed before 2004 are known to have stampbacks.) In addition to the length of the gripper slot, there are other differences between this coin and the three dot version, the DL0003. No evidence has been found that this coin was ever on-stage. In 2008, denominational variations of this coin were sold via an internet auction. However, in total, there are few collections known to have examples of the DN0004 as of 2015. (This Disneyland pressed coin number made with the possibly now canceled #DNP0004.0.0 obverse elongated coin die in its original "0" state / variation, paired with a blank "0" reverse coin die.) Larger prototype elongated coin image in frame or window # 1   2   3 or Giant Image.
Related: Our elongated coin comparison page.

DN0005 Small Bear Country prototype pressed penny. Horizontal pressed penny image. DISNEYLAND ® with heavy "D", BEAR COUNTRY, small bear holding double outlined guitar, © DISNEY, dot border, clean sharp grip slot. Similar to the DL0002, DL0006. Circa 1989. No stampbacked examples known. (No Disney elongated coins pressed before2004 are known to have stampbacks.) Many small differences make this a hard coin to spot. Key is the double outlined guitar which is mostly solid on the DL0006 and the heavy point of the "D" in Disneyland. Due to the few known examples of DN0005 and the lack of any on stage documentation, we believe this very scarce coin was never on-stage. Die status is unknown. (This Disneyland pressed coin number made with the possibly now canceled #DNP0005.0.0 obverse elongated coin die in its original "0" state / variation, paired with a blank "0" reverse coin die.) Larger prototype elongated coin image in frame or window # 1   2   3 or Giant Comparison image, or our comparison page.
Related: Our elongated coin comparison page.

DN0006 Frontier Land Mickey Prototype Pressed Penny. Horizontal pressed penny image. Mickey Mouse with pistol; flat ears, outlined hat and lettering, FRONTIER LAND © DISNEY Disneyland ® 3 dot gripper slot, dot border. Very similar to the DL0010 Frontier Land Cowboy Mickey Pressed coin. No stampbacked examples known. (No Disney elongated coins pressed before 2004 are known to have stampbacks.)
On both DN0006 and DL0010 Mickey’s hat is outlined and completely open at the top. On DN0006 Mickey’s right ear is slightly outlined, grip arcs over 3 dots, curl on top of "Frontier" does not touch a dot. Border dots are smaller than on DL0010 and second dot from the right is out of alignment with the other border dots. (On DL0010 Mickey’s right ear is totally flat, grip arcs over 5 dots, curl on top of "Frontier" touches a dot, border dots are larger than on DN0006 and second dot from the right is in alignment with the other border dots.) Due to the scarcity of the DN0006 and lack of any on-stage documentation, we believe this coin was never on-stage. Die status unknown. (This Disneyland pressed coin number made with the possibly now canceled #DNP0006.0.0 obverse elongated coin die in its original "0" state / variation, paired with a blank "0" reverse coin die.) Larger prototype elongated coin image in frame or window # 1   2   3
Related: Our elongated coin comparison page.

DN0007 Pirates of the Caribbean prototype pressed coin. Vertical pressed penny. PIRATES OF THE CARIBBEAN, outlined bearded pirate wearing tri-corner hat, long coat and boots, holding a sword in his right hand and a pistol in his left hand, standing, full length, wide stance, PIRATES between pistol and sword, OF left, THE right, CARIBBEAN between and below boots, © DISNEY DISNEYLAND ®, dot border. NO "e". Our current guess is circa early 1990s. Not closely similar to any other elongated coin, prototype or onstage. No stampbacked examples known. (No Disney elongated coins pressed before 2004 are known to have stampbacks.) Cluttered artwork has been suggested as the reason this coin was never on-stage. Still it is one of my favorites. Very scarce in early years. Since the turn of the century, several different denominational variations have been reported although in very limited numbers. However, still very hard to find in 2020. Die status is unknown. (This Disneyland pressed coin number made with the possibly now canceled #DNP0007.0.0 obverse elongated coin die in its original "0" state / variation, paired with a blank "0" reverse coin die.) Larger prototype elongated coin image in frame or window # 1   2   3

DN0008 Mickey Rays flat ears Prototype Pressed Penny. Horizontal pressed penny. MICKEY MOUSE, head with rays, large head, flat ears, © DISNEY, Disneyland ® . Looks much like the onstage DL0015 except for the LARGE DOTS in the border. May date from around 1990-2? No stampbacked examples known. (No Disney elongated coins pressed before2004 are known to have stampbacks.) (This Disneyland pressed coin number made with the possibly now canceled #DNP0008.0.0 obverse elongated coin die in its original "0" state / variation, paired with a blank "0" reverse coin die.) Larger prototype elongated coin image in frame or window # 1   2   3
Related: Images of other Mickey Mouse "Rays" pressed penny variations.

DN0009 Minnie and Mickey Main Street Prototype Pressed Penny. Horizontal pressed coin. Main Street in script with scrolls, Minnie at left and Mickey on the right side of the coin's image, ©DISNEY, DISNEYLAND, wire border, grip left. Not closely similar to any other elongated coin, prototype or onstage. Circa early 1990s.Our thanks to the very generous anony-mouse ParkPennies reader that offered to share this image with fellow collectors. (This Disneyland pressed coin number made with the possibly now canceled #DNP0009.0.0 obverse elongated coin die in its original "0" state / variation, paired with a blank "0" reverse coin die.) Larger prototype elongated coin image in frame or window # 1   2   3

DN0010 Mickey in ToonTown Trolley Prototype Pressed Coin. Vertical pressed coin. Toontown trolley also known as the Jolly Trolley, Conductor Mickey, MICKEY'S TOONTOWN, Disneyland®, ©DISNEY, dot border, no "e" for Eurolink. Not closely similar to any other elongated coin, prototype or onstage. As told to Robert Hoff of ParkPennies.com by a longtime Electro Mechanical Shop Cast Member now retired, a penny press machine was planned for placement in Toontown. However per recollections of people close to the project at the time, a simple design developed into a very nice, but, over budget animated penny press design and was abandoned. This penny design dates from that period of time / project. Some years later, a conventional design three play dime press machine was placed in ToonTown, the first Disney pressed dime machine in history. (This Disneyland pressed coin number made with the possibly now canceled #DNP0010.0.0 obverse elongated coin die in its original "0" state / variation, paired with a blank "0" reverse coin die.) Larger prototype elongated coin image in frame or window # 1   2   3

DN0011 This number is an open chronological placeholder for a possible future coin.

DN0012 Main Street USA Train Prototype Pressed Penny. Horizontal pressed coin image. Image of an outlined steam engine, MAIN STREET USA, © DISNEY, Disneyland ® , large-sized dots make a border. No stampbacked examples known. (No Disney elongated coins pressed before 2004 are known to have stampbacks.) Not closely similar to any other prototype or onstage elongated coin. Noticed for sale via an eBay auction on 10/5/08 by well known collector, Dee D. Very scarce examples are known on nickels, dimes, and quarters. The die may date back to the early 1990s. Rarely seen for sale or trade as of 2020. (This Disneyland pressed coin number made with the possibly now canceled #DNP0012.0.0 obverse elongated coin die in its original "0" state / variation, paired with a blank "0" reverse coin die.) Larger prototype elongated coin image in frame or window # 1   2   3

DN0013 Splash Mountain Prototype Pressed Penny. Vertical pressed penny. Three-dimensional Splash Mountain wave, SPLASH MOUNTAIN inscribed within the wave, Disneyland®, ©DISNEY, large dot border. Similar to a Walt Disney World Splash Mountain coin. Scarce. No stampbacked examples known. (No Disney elongated coins pressed before 2004 are known to have stampbacks.) (This Disneyland pressed coin number made with the possibly now canceled #DNP0013.0.0 obverse elongated coin die in its original "0" state / variation, paired with a blank "0" reverse coin die.) Larger prototype elongated coin image in frame or window # 1   2   3

DN0014 THE Fantasmic! Prototype Pressed Penny. Horizontal pressed penny. FANTASMIC! in open letters and underlined by a lightening bolt. Stars arc over an outlined Sorcerer Mickey Mouse standing arms outstretched in lower right, Disneyland © , Enchanted Brooms or flames from Fantasia dancing (appear to be flames) from left to right above a wire border. Circa early 1990s. Probably one of the most famous, sought after and highly valued Disneyland Never-Neverland coins. Not closely similar to any other elongated coin, prototype or onstage. No stampbacked examples known. (No Disney elongated coins pressed before 2004 are known to have stampbacks.) Fantasmic! premiered (soft opening) in the Fall of 1991. Official start date of the show was Spring (March) 1992. Note that this coin has Disneyland © rather than the usual © DISNEY. Cast Member interviews by Robert Hoff of ParkPennies.com and other strong evidence support that this coin was offered from a single die machine. (An image of the Fantasmic! single-coin marquee was shared with ParkPennies in the 2010s.) A retired "Arcade Shop" Cast Member stated that the machine was set up and ready to be placed onstage, but, because a suitable location could not be agreed to, it never was. Per the best information available to us at the time of this report: Some non-native coin examples have been reported. Not closely similar to any other elongated coin, prototype or onstage. Die status is unknown. (This Disneyland pressed coin number made with the possibly now canceled #DNP0014.0.0 obverse elongated coin die in its original "0" state / variation, paired with a blank "0" reverse coin die.) Larger DN0014 prototype elongated coin image in frame or window # 1   2   3
Related: Our scarce or rare Disneyland pressed pennies and elongated coins page.

DN0015 Sebastian with Band Prototype Pressed Penny. Prototype pressed coin. SEBASTIAN, full body, facing left, claws raised, © DISNEY, DISNEYLAND ® , "e" , dot border. Similar to the onstage DL0125 (click to open the guide) but, with a ring or wire border added at the outside edge of the dot border. The outside line around the coin, just outside the dot border, often called a ring or band makes this an unusual coin. Bands are sometimes seen on Disneyland coins as are dot borders. But this is the only Disney coin we know of that has both. Cool. :-) (This Disneyland pressed coin number made with the possibly now canceled #DNP0015.0.0 obverse elongated coin die in its original "0" state / variation, paired with a blank "0" reverse coin die.) Larger prototype elongated coin image in frame or window # 1   2   3 or Giant Image

DN0016 Snow White no © Prototype Pressed Penny. Vertical pressed penny. SNOW WHITE, portrait image, full face, "e" for Eurolink Design Corporation replaces the dot nearest the center of the gripper slot, DISNEYLAND (no © Disney) dot border. This die lived on as the DL0039 with a © Disney added. Circa 1995. No stampbacked examples known. (No Disney elongated coins pressed before 2004 are known to have stampbacks.) Three of the nine Snow White themed coins are known to have at first, lacked a "© DISNEY". No evidence has been found to support an on-stage appearance of this set. Anecdotal evidence leads to the conclusion that test rolls were made at the park. Possibly the lack of "© DISNEY" was noted and the dies returned to Eurolink to be corrected. Hard to find coins. This die became the DL0039, ergo, the DN0016 has been canceled. (This Disneyland pressed coin number made with the possibly now canceled #DNP0016.0.0 obverse elongated coin die in its original "0" state / variation, paired with a blank "0" reverse coin die.) Larger prototype elongated coin image in frame or window # 1   2   3

DN0017 Wicked Witch no © Prototype Pressed Penny. Horizontal pressed penny. Wicked Witch, head and shoulders, profile facing right, "e" for Eurolink Design Corporation replaces the dot nearest the center of the gripper slot, DISNEYLAND (no © Disney) dot border. This die lived on as the DL0040 with a © Disney added. Circa 1995. No stampbacked examples known. (No Disney elongated coins pressed before 2004 are known to have stampbacks.) Three of the nine Snow White themed coins are known to have at first, lacked a " © DISNEY". No evidence has been found to support an on-stage appearance of this set. Anecdotal evidence leads to the conclusion that test rolls were made at the park. Possibly the lack of " © DISNEY" was noted and the dies returned to Eurolink to be corrected. Hard to find coins. This die became the DL0040, ergo, the DN0017 has been canceled. (This Disneyland pressed coin number made with the possibly now canceled #DNP0017.0.0 obverse elongated coin die in its original "0" state / variation, paired with a blank "0" reverse coin die.) Larger prototype elongated coin image in frame or window # 1   2   3

DN0018 Bashful no © Prototype Pressed Penny. Vertical pressed penny. BASHFUL, full length, standing to left, hands behind back, "e" for Eurolink Design Corporation replaces the dot nearest the center of the gripper slot, DISNEYLAND (no © Disney) dot border. This die lived on as the DL0041 with a © Disney added. Circa 1995. No stampbacked examples known. (No Disney elongated coins pressed before 2004 are known to have stampbacks.) Three of the nine Snow White themed coins are known to have at first, lacked a " © DISNEY". No evidence has been found to support an on-stage appearance of this set. Anecdotal evidence leads to the conclusion that test rolls were made at the park. Possibly the lack of " © DISNEY" was noted and the dies returned to Eurolink to be corrected. Hard to find coins. This die became the DL0041, ergo, the DN0018 has been canceled. (This Disneyland pressed coin number made with the possibly now canceled #DNP0018.0.0 obverse elongated coin die in its original "0" state / variation, paired with a blank "0" reverse coin die.) Larger prototype elongated coin image in frame or window # 1   2   3

Disneyland "Penny Art" pressed nickels, an interesting, but, hard to find set. Interviews with Cast Members and related research by Robert Hoff of ParkPennies.com support the long held belief that these "Penny Art" dies were engraved as "penny-sized" coin dies in error. A Cast Member that was close to this project at the time, in the mid 1990s, stated that when these dies arrived they were tested in a machine set up and designed, for the first time to "intensionally" press nickels. :-) However, the smaller than expected penny-sized die images which were supplied left an unacceptable blank space at the end of the rolled coin. So, corrected, dies with larger images were ordered before the machine was placed on-stage. The machine when placed onstage became the first Disney coin press in world to press nickels.
Per the best information available to us to date in 2020, less than a dozen "penny art" sets are believed to be in the hands of collectors. (We have seen coins trade hands. But, to the best of our knowledge, no new coins have been offered in many years. Reports of incomplete sets persist. We do not believe an equal numbers of each coin in this set of three were made. Examples are also known to exist on non-native or off-denomination coins such as cents. Die status is unknown. Related: Our scarce or rare Disneyland pressed pennies and elongated coins page.

DN0019 Top Hat Mickey Penny Art prototype vertical pressed nickel. Mickey, full length, in tux with top hat & cane, "e" for Eurolink Design Corporation replaces the dot nearest the center of the gripper slot, DISNEYLAND. Penny-sized image. Similar to the DL0058, DL0058a and DN0019P. Die believed to have been engraved in early 1995.No stampbacked examples known. (No Disney elongated coins pressed before 2004 are known to have stampbacks.) Open prototype elongated coin image in frame or window #1   2   3 or Giant Top Hat Mickey Penny Art Pressed Nickel Comparison image, or our Top Hat Mickey Pressed Nickels comparison page.
DN0019P Top Hat Mickey Penny Art prototype vertical pressed penny. Mickey, full length, in tux with top hat & cane, "e" for Eurolink Design Corporation replaces the dot nearest the center of the gripper slot, DISNEYLAND. Penny-sized image. No stampbacked examples known. (No Disney elongated coins pressed before 2004 are known to have stampbacks.)
Here is an example of a scarce off-denomination cent variation of the DN0019. It was pressed on the incorrectly sized DN0019 "penny art" nickel die. See also DN0019, DL0058 and DL0058a. Reported by and original image courtesy of The Mark Brown Collection. (This Disneyland pressed coin number made with the possibly now canceled #DNP0019.0.0 obverse elongated coin die in its original "0" state / variation, paired with a blank "0" reverse coin die.) Larger prototype elongated coin image in frame or window # 1   2   3

DN0020 40 Years of Adventure Penny Art prototype. Horizontal pressed nickel. 40 YEARS OF ADVENTURES, © Disney, "e" for Eurolink Design Corporation replaces the dot nearest the center of the gripper slot, DISNEYLAND. Penny-sized image. Similar to the DL0059 and DN0020P. Die believed to have been engraved in early 1995. No stampbacked examples known. (No Disney elongated coins pressed before 2004 are known to have stampbacks.) Open larger prototype elongated coin image in frame or window #1   2   3 or Giant Comparison image, or our comparison page.
DN0020P Horizontal prototype elongated penny image. Horizontal pressed penny. 40 YEARS OF ADVENTURES, © Disney, "e" for Eurolink Design Corporation replaces the dot nearest the center of the gripper slot, DISNEYLAND. Penny-sized image. No stampbacked examples known. (No Disney elongated coins pressed before 2004 are known to have stampbacks.)
This is an example of a scarce off-denomination or cent variation of the DN0020. It was pressed on the incorrectly cut DN0020 penny-sized nickel die. See also DN0020 and DL0059. Reported by and original image courtesy of The Mark Brown Collection. (This Disneyland pressed coin number made with the possibly now canceled #DNP0020.0.0 obverse elongated coin die in its original "0" state / variation, paired with a blank "0" reverse coin die.) Larger prototype elongated coin image in frame or window # 1   2   3

DN0021 Minnie & Purse Penny Art prototype pressed nickel. Vertical pressed coin. Minnie, full length with purse, "e" for Eurolink Design Corporation replaces the dot nearest the center of the gripper slot, DISNEYLAND. Penny-sized image. Similar to the DL0060, DL0060a and DN0021P. Die believed to have been engraved in early1995. No stampbacked examples known. (No Disney elongated coins pressed before 2004 are known to have stampbacks.) Open larger prototype elongated coin image in frame or window #1   2   3 or Giant Comparison image, or our comparison page.
DN0021P Minnie & Purse Penny Art prototype pressed penny. Vertical pressed coin. Minnie, full length with purse, "e" for Eurolink Design Corporation replaces the dot nearest the center of the gripper slot, DISNEYLAND. Penny-sized image. No stampbacked examples known. (No Disney elongated coins pressed before 2004 are known to have stampbacks.)
This is an example of a scarce off-denomination or cent variation of the DN0021. It was pressed by the incorrectly cut DN0021 penny-sized nickel die. See also DN0021, DL0060 and DL0060a.
Reported by and original image courtesy of The Mark Brown Collection. (This Disneyland pressed coin number made with the possibly now canceled #DNP0021.0.0 obverse elongated coin die in its original "0" state / variation, paired with a blank "0" reverse coin die.) Larger prototype elongated coin image in frame or window # 1   2   3

DN0022 Happy New Year 1996 Santa Mickey Prototype Pressed Nickel. Vertical prototype elongated nickel image. HAPPY NEW YEAR 1996, Santa Mickey, © Disney, e; Disneyland ® Error date. (This 1996 set celebrates the 1997 New Year.) Pictured to the left for comparison, the similar DL0103 which has the corrected date "1997". Circa late 1996. No stampbacked examples known.(No Disney elongated coins pressed before 2004 are known to have stampbacks.) The 1996 New Year date was an easy to make design error. The coin should have read 1997. Well, it was 1996, the first year of a dated Seasonal Nickel Set, and it was New Years... and there wasn't a Happy New Year coin made for 1996... :-) It can happen. ParkPennies.com interviews with Cast Members closely involved in the project at the time confirm that the die was in the Park. However, it never was on-stage, at least as far as anyone can remember or document. The few known examples of this coin, the lack of on-stage documentation, as well as known test and miss-roll coins support the Cast Members' recollections. Die status unknown. Larger prototype elongated coin image in frame or window # 1   2   3
Related: The ParkPennies guide to all Disneyland Seasonal or Holiday Pressed Nickels. These Christmas and New Years pressed nickels have been issued every year at Disneyland Park since 1995 and issued every year at Disney California Adventure since 2010. One really fun collection! Plus, they are yet another reason to spend the Holidays at Disneyland! :-) (This Disneyland pressed coin number made with the possibly now canceled #DNP0022.0.0 obverse elongated coin die in its original "0" state / variation, paired with a blank "0" reverse coin die.) Larger prototype elongated coin image in frame or window # 1   2   3

DN0023 Second Edition Pressed Penny Book coin. Horizontal pressed penny image. Disneyland Castle, Disney's California Adventure Grizzly Peak, Disneyland Resort Monorail, Disneyland ® RESORT. No stampbacked examples known. (No Disney elongated coins pressed before 2004 are known to have stampbacks.) The coin is believed to have been engraved exclusively for the Prototype Disneyland Resort Penny Press Collection Book, Second Edition. Coin looks somewhat like the DR0049. Blank back. Reportedly proposed as a follow-up to the well received First Edition Penny Collector Book. Unfortunately, this extremely scarce book and coin are known only as prototypes. (The publisher stated at the time that only two penny collecting books were made and used in concept presentations.) Images courtesy of a kind anony-mouse ParkPennies.com reader. Die status is believed to be open. (This Disneyland pressed coin number made with the possibly now canceled #DNP0023.0.0 obverse elongated coin die in its original "0" state / variation, paired with a blank "0" reverse coin die.) Larger prototype elongated coin image in frame or window # 1   2   3
Related: The ParkPennies Disneyland Resort Penny Press Collection Book, Second Edition detail page.

The Union Bank of California pressed penny prototype set of coins were all pressed on a single four image die shaft. Each has a train image that is difficult to recognize. It did not even come close to meeting the high standards of the penny press company that was commissioned to engrave the dies and manufacture the machine. So, a replacement die roll of DL0153-DL0156 was engraved which reduced the focal image to just the locomotive and tender while increasing the image size. The original ring die of four images, used to press the prototype set, was reported around November of 2000 and later confirmed destroyed by the engraver / owner as well as a trusted source. The finished hand crank penny press machine, with the new, corrected dies held a place of honor in the UBOC Bank, Main Street, Disneyland for about two years where UBOC pennies could be pressed for free(!) Related: Our scarce or rare Disneyland pressed pennies and elongated coins page.

LEFT: Side by side comparison of the scarce DN0024 and common DL00153. (Click the thumbnail for a larger image.) As you can see there are many small details that separate these two coin types. Easiest to for me to identify is the banner at the bottom of the design that breaks through the beaded border on the Disneyland DL variety and stops short of the border on the prototype DN variety. All UBOC elongated pennies have no examples with stampbacks are known.

RIGHT: View DL0153 - DL0156 dot placement detail. (Same as DN0024-DN0027) The four coins vended by this four die hand crank penny press were all nearly identical, with the exception of an enlarged dot that was placed differently, sequentially, on each coin in the set. Click the image above to open a larger image with greater detail. (Yes, a small detail for some, a giant detail for ParkPennies.com. :-)

RELATED: Large image of all eight coins, DL0153-156 and DN0024-27 pressed coins with souvenir coin holder card.

DN0024 Union Bank of California "UBOC" prototype pressed coin. Horizontal pressed penny. DISNEYLAND ® Weak image of train, UNION BANK OF CALIFORNIA banner ribbons are inside lower part of the dot border. The initial E is above the grip slot and the initial P below. (Paradise Engraving) The forth dot to the right of the initial P is larger than the first3 dots. No " © DISNEY". No stampbacked examples known. (No Disney elongated coins pressed before 2004 are known to have stampbacks.) Circa November 2000. Similar to the DL0153. This coin set and the later DL0153-156 set, were designed for a hand crank penny press which uses a single ring die for all four designs. (This Disneyland pressed coin number made with the possibly now canceled #DNP0024.0.0 obverse elongated coin die in its original "0" state / variation, paired with a blank "0" reverse coin die.) Larger prototype elongated coin image in frame or window # 1   2   3

DN0025 Union Bank of California "UBOC" prototype pressed coin. Horizontal pressed penny. DISNEYLAND ® Weak image of train, UNION BANK OF CALIFORNIA banner ribbons are inside lower part of the dot border. The initial E is above the grip slot and the initial P below. (Paradise Engraving) The third dot to the right of the initial P is larger than the first2 dots. No " © DISNEY". No stampbacked examples known. (No Disney elongated coins pressed before 2004 are known to have stampbacks.) Circa November 2000. Similar to the DL0154. This coin set and the later DL0153-156 set, were designed for a hand crank penny press which uses a single ring die for all four designs. (This Disneyland pressed coin number made with the possibly now canceled #DNP0024.0.0 obverse elongated coin die in its original "0" state / variation, paired with a blank "0" reverse coin die.) Larger prototype elongated coin image in frame or window # 1   2   3

DN0026 Union Bank of California "UBOC" prototype pressed coin. Horizontal pressed penny. DISNEYLAND ® Weak image of train, UNION BANK OF CALIFORNIA banner ribbons are inside lower part of the dot border. The initial E is above the grip slot and the initial P below. (Paradise Engraving) The second dot to the right of the initial P is larger than the first dot. No " © DISNEY". No stampbacked examples known. (No Disney elongated coins pressed before 2004 are known to have stampbacks.) Circa November 2000. Similar to the DL0155. This coin set and the later DL0153-156 set, were designed for a hand crank penny press which uses a single ring die for all four designs. (This Disneyland pressed coin number made with the possibly now canceled #DNP0024.0.0 obverse elongated coin die in its original "0" state / variation, paired with a blank "0" reverse coin die.) Larger prototype elongated coin image in frame or window # 1   2   3

DN0027 Union Bank of California "UBOC" prototype pressed coin. Horizontal pressed coin. DISNEYLAND ® Weak image of train, UNION BANK OF CALIFORNIA banner ribbons are inside lower part of the dot border. The initial E is above the grip slot and the initial P below. (Paradise Engraving) The first dot to the right of the initial P is larger than the next3 dots. No " © DISNEY". No stampbacked examples known. (No Disney elongated coins pressed before 2004 are known to have stampbacks.) Circa November 2000. Similar to the DL0156. This coin set and the later DL0153-156 set, were designed for a hand crank penny press which uses a single ring die for all four designs. (This Disneyland pressed coin number made with the possibly now canceled #DNP0024.0.0 obverse elongated coin die in its original "0" state / variation, paired with a blank "0" reverse coin die.) Larger prototype elongated coin image in frame or window # 1   2   3
RIGHT: The DL0156 onstage Union Bank of California pressed penny. An example of the coin that was pressed onstage. The coin pictured was pressed using a pre 1982 solid copper cent. However, the free pennies that were given out to the public were new, copper plated zinc cents. Holders that held the pressed coins, about the size of a business card, were also offered to some guests.
Related: See all the UBOC onstage pressed pennies pictured in the Disneyland pressed penny guide.

DN0028 2003 Mickey Autopia Prototype Pressed Penny. Horizontal pressed penny. DISNEYLAND ® , Mickey, waving, in Autopia car, 2003, © DISNEY, "e" for Eurolink Design Corporation replaces the dot nearest the center of the gripper slot dot border. Now, seriously, aren't you thinking that you might have a pressed coin like this? You might. If so, I'd say it's time to be sure it has a place of honor in you collection... And, if you recall how you acquired it, please let us know. (This Disneyland pressed coin number made with the possibly now canceled #DNP0025.0.0 obverse elongated coin die in its original "0" state / variation, paired with a blank "0" reverse coin die.) Larger prototype elongated coin image in frame or window # 1   2   3 or Giant Comparison image
RIGHT: The DL0171 onstage coin has the same artwork but, without "2003" added. We're going out on a limb here and say circa 2003. :-) No stampbacked examples known. (No Disney elongated coins pressed before 2004 are known to have stampbacks.)

DN0029 Disneyland Hotel Castle Prototype Pressed Penny. Vertical pressed penny. DISNEYLAND ® HOTEL, castle, above the words, © DISNEY, "e" for Eurolink Design Corporation replaces the dot nearest the center of the gripper slot. Nearly identical to the DR0079, except for slight differences in the engraving, border dot size, star images, etc. Circa February 2004.No stampbacked examples known. (No Disney elongated coins pressed before 2004 are known to have stampbacks.) Rumors given ParkPennies.com suggest that this prototype die was made for a three die mechanism, however, the onstage replacement die, the DR0079, is held in a single die mechanism. (This Disneyland pressed coin number made with the possibly now canceled #DNP0026.0.0 obverse elongated coin die in its original "0" state / variation, paired with a blank "0" reverse coin die.) Larger prototype elongated coin image in frame or window # 1   2   3 or Giant Comparison image, or our comparison page.
Related: Close up comparison of the very similar DN0029 and the DR0079 elongated coins.

DN0030 Racer Mickey Mouse Prototype Pressed Penny. Vertical pressed penny. DISNEYLAND ® Racer Mickey Mouse in baseball cap, helmet under his arm, AUTOPIA 2004 © DISNEY, "e" for Eurolink Design Corporation replaces the dot nearest the center of the gripper slot. Very much like the DL0232 pressed penny, (right). But, a comparison of the two coins will show the prototype DN0030 features a blurred lighting bolt on Mickey's helmet and other image differences. Circa late 2003. No stampbacked examples known. (No Disney elongated coins pressed before 2004 are known to have stampbacks.)Rumors given ParkPennies.com suggest that this die was made to fit the wrong type of machine possibly a two pin vs. four pin die. We believe the DL0232 was made as a corrected replacement. (This Disneyland pressed coin number made with the possibly now canceled #DNP0027.0.0 obverse elongated coin die in its original "0" state / variation, paired with a blank "0" reverse coin die.) Larger prototype elongated coin image in frame or window # 1   2   3 or Giant Comparison image, or our comparison page.
Related: The ParkPennies Disneyland elongated coin variations comparison guide and a link to a close up comparison of the very similar DN0030 and the DL0232 elongated coins.

DN0031 Mickey Mouse Tower of Terror pressed penny prototype. Vertical pressed penny image. DISNEYLAND ® Mickey Mouse in front of open elevator door, © DISNEY, "e" for Eurolink Design Corporation replaces the dot nearest the center of the gripper slot, dot border. Similar to the CA0053.No stampbacked examples known. (No Disney elongated coins pressed before 2004 are known to have stampbacks.) Near identical artwork to the CA0053 except, "DISNEYLAND ®" is in the place of "DISNEY’S CALIFORNIA ADVENTURE ^tm". Examples known on both copper and zinc cents. Also rumored to have been pressed on non-native coin denominations. This penny press machine was reported / rumored to have been themed in Canada before it was shipped to Anaheim where the error was caught. Die status unknown. (This Disneyland pressed coin number made with the possibly now canceled #DNP0028.0.0 obverse elongated coin die in its original "0" state / variation, paired with a blank "0" reverse coin die.) Larger prototype elongated penny image in frame or window # 1   2   3
Related: Tower of Terror pressed penny story.
Related: WDI DN0031 Tower of Terror pressed penny PIN!
Disneyland Hollywood Tower Hotel error set original images and report courtesy of the extensive C. Neal Collection.

DN0032 Tower of Terror, HTH pressed penny prototype. Vertical pressed penny image. DISNEYLAND ® Tower of Terror "HTH" logo, THE HOLLYWOOD TOWER HOTEL © DISNEY, "e" for Eurolink Design Corporation replaces the dot nearest the center of the gripper slot, dot border. Similar to the CA0054. No stampbacked examples known. (No Disney elongated coins pressed before 2004 are known to have stampbacks.) Near identical artwork to the CA0054 except, "DISNEYLAND ®" is in the place of "DISNEY’S CALIFORNIA ADVENTURE ^tm". Examples known on both copper and zinc cents. Also rumored to have been pressed on non-native coin denominations. This penny press machine was reported / rumored to have been themed in Canada before it was shipped to Anaheim where the error was caught. Die status unknown. (This Disneyland pressed coin number made with the possibly now canceled #DNP0029.0.0 obverse elongated coin die in its original "0" state / variation, paired with a blank "0" reverse coin die.) Larger prototype elongated penny image in frame or window # 1   2   3
Related Tower of Terror pressed penny story.
Disneyland Hollywood Tower Hotel error set original images and report courtesy of the extensive C. Neal Collection.

DN0033 Bellhop Goofy pressed penny prototype. Vertical pressed penny image. DISNEYLAND ® Bellhop Goofy, facing right, holding over-sized hotel room key on key chain that has "HTH 1313 CHECK IN SOON" on it. © DISNEY, "e" for Eurolink Design Corporation replaces the dot nearest the center of the gripper slot, dot border. Similar to the CA0055.No stampbacked examples known. (No Disney elongated coins pressed before 2004 are known to have stampbacks.) Near identical artwork to the CA0055 except, "DISNEYLAND ®" is in the place of "DISNEY’S CALIFORNIA ADVENTURE ^tm". Examples known on both copper and zinc cents. Also rumored to have been pressed on non-native coin denominations. This penny press machine was reported / rumored to have been themed in Canada before it was shipped to Anaheim where the error was caught. Die status unknown. (This Disneyland pressed coin number made with the possibly now canceled #DNP0030.0.0 obverse elongated coin die in its original "0" state / variation, paired with a blank "0" reverse coin die.) Larger prototype elongated penny image in frame or window # 1   2   3
Related: Tower of Terror pressed penny story.
Related: WDI DN0031 Tower of Terror pressed penny PIN!
Disneyland Hollywood Tower Hotel error set original images and report courtesy of the extensive C. Neal Collection.

DN0034 Mark Twain Riverboat NO inscription horizontal prototype elongated penny image. DISNEYLAND ® image of a stern wheeler steamboat reminiscent of Disneyland's Mark Twain Riverboat, © DISNEY. NO inscription below the ship, no border, no examples with stampbacks are known. For similar coins with the inscription "MARK TWAINRIVERBOAT" please compare the on-stage DL0249. Based on early coin examples, the penny press machine placed on-stage outside Bonanza Outfitters on 7/16/04, vended the DL0249 coin as the button "C" selection from the very start. However, the original Rivers of America pressed coin machine's marquee displayed this "DN0034 image" and only later a "DL0249 image" as the button "C" selection. So what became of the original coin? According to trusted sources, a die which matched the original DN0034 marquee artwork, was proposed and rejected. Given the original machine marquee was made using the DN0034 artwork, we are told and agree that DN0034 coins must have been pressed as proofs / marquee samples etc. even though the die was later replaced. Therefore, we have reserved elongated coin collection guide number DN0034 for any coins representing this early prototype die. And yes, it appears another Indiana Jones style adventure awaits those seeking this coin. Update: In 2010 confirmation, via scans of this coin, became available to ParkPennies.com readers. If your quest is successful, please do send us a scan of your find. Die status unknown. (This Disneyland pressed coin number made with the possibly now canceled #DNP0031.0.0 obverse elongated coin die in its original "0" state / variation, paired with a blank "0" reverse coin die.) Larger prototype elongated coin image in frame or window # 1   2   3 or

Related: View our comparison image of the prototype DN0034 and onstage DL0249.
Related: View a 2013 WDI DN0034 Style WDI Pressed Coin Pin.

RIGHT: DL0249 ONSTAGE MARK TWAIN RIVERBOAD WITH INSCRIPTION horizontal squished penny or elongated coin image. DISNEYLAND ® © DISNEY, side view of Mark Twain stern wheeler, inscription: "MARK TWAIN RIVERBOAT", no border. Replaced Mickey Mouse Park, DL0057. Taken offstage in early 2010, returned on 9/23/2010 with replacement die number DL0482, similar artwork with a dot border and "D" for Disneyland replacing the dot nearest the center of the coin grip. Reverse: BLANK. Located on the boardwalk outside Bonanza Outfitters, Frontierland, button "C". Larger pressed penny image in frame or window # 1   2   3

DN0035 This number is an open chronological placeholder for a possible future coin.

DN0036 This number is an open chronological placeholder for a possible future coin.

DN0037 House of the Future 1957 Magical Milestones Prototype Pressed Coin. Vertical pressed penny image. DISNEYLAND® RESORT House of the Future, HOUSE OF THE FUTURE -House of the Future opens- Landscape plants appear to have no relief compared to the onstage version and may exhibit some evidence of incompletely engraved device details. MAGICALMILESTONES 1957, Border of 51 small chained circles around the upper three quarters of the coin's outside edge, featuring a solid dot in the circle which sequentially marks the coin's Magical Milestone year. (1955 is the first lower left circle.) ©DISNEY. No stampbacked examples known. (No Disney elongated coins pressed before 2004 are known to have stampbacks.) The very similar to the DL0299. (This Disneyland pressed coin number made with the possibly now canceled #DNP0034.0.0 obverse elongated coin die in its original "0" state / variation, paired with a blank "0" reverse coin die.) Larger prototype elongated coin image in frame or window # 1   2   3 or Giant 1957 Disneyland 50th Anniversary Prototype Pressed Penny Image or Giant Comparison image. (It's ParkPennies.com, we do crazy, fun stuff like that! :-)

DN0038 Monorail Matterhorn 1959 Magical Milestones Prototype Pressed Coin.  Vertical pressed penny image. DISNEYLAND® RESORT, Monorail, stylized, Matterhorn in background.-Disneyland® Monorail opens- Monorail cabin is solid and may exhibit some evidence of incompletely engraved device details. Border dot is flat, not rounded, grip is shallow . MAGICALMILESTONES 1959, Border of 51 small chained circles around the upper three quarters of the coin's outside edge, featuring a solid dot in the circle which sequentially marks the coin's Magical Milestone year. (1955 is the first lower left circle.) ©DISNEY. No stampbacked examples known. (No Disney elongated coins pressed before 2004 are known to have stampbacks.) Similar to standard reference number: DR0096 (This Disneyland pressed coin number made with the possibly now canceled #DNP0035.0.0 obverse elongated coin die in its original "0" state / variation, paired with a blank "0" reverse coin die.) Larger prototype elongated coin image in frame or window # 1   2   3 or Giant 1959 Disneyland 50th Anniversary Prototype Pressed Penny Image or Giant Comparison image.

DN0039 First Ambassador 1964 Magical Milestones Prototype Pressed Coin. Vertical pressed penny image. DISNEYLAND® RESORT, Larger script letter "D", small castle and Tinker Bell image overlays and may exhibit some evidence of incompletely engraved device details. -First Ambassador Selected- MAGICAL MILESTONES 1964, Border of 51 small chained circles around the upper three quarters of the coin's outside edge, featuring a solid dot in the circle which sequentially marks the coin's Magical Milestone year. (1955 is the first lower left circle.) ©DISNEY. No stampbacked examples known. (No Disney elongated coins pressed before 2004 are known to have stampbacks.) Similar to standard reference number: DL0284 (This Disneyland pressed coin number made with the possibly now canceled #DNP0036.0.0 obverse elongated coin die in its original "0" state / variation, paired with a blank "0" reverse coin die.) Larger prototype elongated coin image in frame or window # 1   2   3 or Giant 1964 Disneyland 50th Anniversary Prototype Pressed Penny Image or Giant Comparison image.

DN0040 Winnie The Pooh 1968 Magical Milestones Prototype Pressed Coin. Vertical pressed penny image. DISNEYLAND® RESORT, WINNIE THE POOH pressed coin. DISNEYLAND ® PARK (Yes, this is the only MM coin that says "PARK". For readers that have followed the Disney / Pooh copyright legal history, it may seemed appropriate to change the description to "Park"over "Resort".) WINNIE THE POOH, Pooh and honey jar, FOR PRESIDENT. -"Winnie the Pooh for President"- DISNEYLAND RESORT, onstage has Disneyland Park. Winnie is outlined, not solid. MAGICAL MILESTONES 1968, link border with year's link solid. BASED ON "WINNIE THE POOH" WORKS BY A. A. MILNE AND "e" . H. SHEPARD, © DISNEY. Similar to the standard reference number: DL0320. (This Disneyland pressed coin number made with the possibly now canceled #DNP0037.0.0 obverse elongated coin die in its original "0" state / variation, paired with a blank "0" reverse coin die.) Larger prototype elongated coin image in frame or window # 1   2   3 or Giant 1968 Disneyland 50th Anniversary Prototype Pressed Penny Image or Giant Comparison image.

DN0041 Walt Disney Story 1973 Magical Milestones Prototype Pressed Coin. Vertical pressed penny image. DISNEYLAND® RESORT, WALT DISNEY pressed coin. DISNEYLAND ® RESORT, OUTLINED picture of Walt, The Walt Disney (signature) STORY -The Walt Disney Story opened in the Main Street Opera House- MAGICAL MILESTONES 1973, Border of 51 small chained circles around the upper three quarters of the coin’s outside edge, featuring a solid dot in the circle which sequentially marks the coin’s Magical Milestone year. (1955 is the first lower left circle.) © DISNEY. Similar to the standard reference number: DL0285. (This Disneyland pressed coin number made with the possibly now canceled #DNP0038.0.0 obverse elongated coin die in its original "0" state / variation, paired with a blank "0" reverse coin die.) Larger prototype elongated coin image in frame or window # 1   2   3 or Giant 1973 Disneyland 50th Anniversary Prototype Pressed Penny Image or Giant Comparison image.

DN0042 Mickey 200 Millionth Guest 1981 Magical Milestones Prototype Pressed Coin. Vertical pressed penny image. DISNEYLAND® RESORT, MICKEY 200,000,000 GUESTS pressed coin. DISNEYLAND® RESORT, Mickey, with solid, not outlined ears, banner with "200,000,000" and may exhibit some evidence of incompletely engraved device details. -200,000,000th Guest Welcomed to Disneyland® park- MAGICAL MILESTONES 1981, Border of 51 small chained circles around the upper three quarters of the coin's outside edge, featuring a solid dot in the circle which sequentially marks the coin's Magical Milestone year. (1955 is the first lower left circle.) ©DISNEY Similar to the DL0286 which features Mickey with outlined ears. (This Disneyland pressed coin number made with the possibly now canceled #DNP0039.0.0 obverse elongated coin die in its original "0" state / variation, paired with a blank "0" reverse coin die.) Larger prototype elongated coin image in frame or window # 1   2   3 or Giant 1981 Disneyland 50th Anniversary Prototype Pressed Penny Image or Giant Comparison image.

DN0043 Brer Rabbit Splash Mt. 1989 Magical Milestones Prototype Pressed Coin. Vertical pressed penny image. DISNEYLAND® RESORT, BRER RABBIT pressed coin. DISNEYLAND® RESORT, Brer Rabbit in front of Splash Mountain. OUTLINE IMAGE and may exhibit some evidence of incompletely engraved device details. -Splash Mountain opens- MAGICAL MILESTONES1989, Border of 51 small chained circles around the upper three quarters of the coin's outside edge, featuring a solid dot in the circle which sequentially marks the coin's Magical Milestone year. (1955 is the first lower left circle.) ©DISNEY No stampbacked examples known. (No Disney elongated coins pressed before 2004 are known to have stampbacks.) Similar to the standard reference number: DL0309. (This Disneyland pressed coin number made with the possibly now canceled #DNP0040.0.0 obverse elongated coin die in its original "0" state / variation, paired with a blank "0" reverse coin die.) Larger prototype elongated coin image in frame or window # 1   2   3 or Giant 1989 Disneyland 50th Anniversary Prototype Pressed Penny Image or Giant Comparison image.

DN0044 Tomorrowland Reopens 1998 Magical Milestones Prototype Pressed Coin. Vertical pressed penny image. DISNEYLAND® RESORT, TOMORROWLAND REOPENS. Lighter / smaller DISNEYLAND® RESORT, lighter "T" logo, TOMORROWLAND. -The New Tomorrowland opens- MAGICAL MILESTONES 1998, Border of 51 small chained circles around the upper three quarters of the coin's outside edge, featuring a solid dot in the circle which sequentially marks the coin's Magical Milestone year. (1955 is the first lower left circle.) ©DISNEY No stampbacked examples known. (No Disney elongated coins pressed before 2004 are known to have stampbacks.) Similar to the standard reference number: DL0301. (This Disneyland pressed coin number made with the possibly now canceled #DNP0041.0.0 obverse elongated coin die in its original "0" state / variation, paired with a blank "0" reverse coin die.) Larger prototype elongated coin image in frame or window # 1   2   3 or Giant 1998 Disneyland 50th Anniversary Prototype Pressed Penny Image or Giant Comparison image.

DN0045 This number is an open chronological placeholder for a possible future coin.

DN0046 Matterhorn Abominable Snowman Prototype Pressed Penny. DISNEYLAND ®, Corrected spelling of MATTERHORN on banner, castle pennant below, abominable snowman or Yeti also known as "Harold", waist up, standing behind banner, (c) Disney, no border. Snowman's left hand has a "dripping claw" and other small points that differentiate this coin / die from the DL0250. Circa 7/2004. No stampbacked examples known. (No Disney elongated coins pressed before 2004 are known to have stampbacks.) View very large image of the DN0046 in a new window. To help in identification, click for a close up comparison image of the DL0236, DL0250 and DN0046 Matternhorn / Matterhorn coins. See also: The Matternhorn error coin comparison page for guide listings and comparison of the DL0236, DL0250 and DN0046. (This Disneyland pressed coin number made with the possibly now canceled #DNP0043.0.0 obverse elongated coin die in its original "0" state / variation, paired with a blank "0" reverse coin die.) Larger prototype elongated penny image in frame or window # 1   2   3 or Giant Image

DN0047 Brer Bear Critter Country Prototype Pressed Penny. DISNEYLAND ® PARK Brer Bear CRITTER COUNTRY © DISNEY, "e" for Eurolink Design Corporation replaces the dot nearest the center of the gripper slot, classic bead or dot border. Brer Bear appears to be sitting on an invisible log. This unusual pose, gives him an odd squatting profile. Therefore, he was nicknamed "Poo Bear" by a well-known Disney elongated coin collector and her daughter who we won't mention because we don't want to embarrass Nancy and Wendy Wooten. :-) Circa February, 2005. Not closely similar to any other elongated coin, prototype or onstage. In late 2021, examples of this coin with both large and small print dot matrix style "Disneyland Park" stampbacks were reported. (No Disney elongated coins pressed before 2004 are known to have stampbacks.) (This Disneyland pressed coin number made with the possibly now canceled #DNP0044.0.0 obverse elongated coin die in its original "0" state / variation, paired with a blank "0" reverse coin die.) Larger prototype elongated coin image in frame or window # 1   2   3

DN0048 Splash Mountain Log Prototype Pressed Penny. DISNEYLAND® Park, Brer Bear, fox and rabbit in log vehicle. © DISNEY dot border, "e" for Eurolink Design Corporation replaces the dot nearest the center of the gripper slot, dot border, image is only outlined. The engravers work on this die is not as "three dimensional" as the onstage DL0278 / DL0345 examples which feature nearly the same art work with high relief, little outlining, and back stamps. In late 2021, the first stampbacked examples were reported featuring a faint dot matrix style "Disneyland Park" and also "Splash Mountain" in both narrow and block script like the DL0278. (This Disneyland pressed coin number made with the possibly now canceled #DNP0045.0.0 obverse elongated coin die in its original "0" state / variation, paired with a blank "0" reverse coin die.) Larger prototype elongated coin image in frame or window # 1   2   3

DN0049 The New Space Mountain 2005 Prototype Pressed Penny. Top of Space Mountain, THE NEW SPACE MOUNTAIN 2005, wire border. Engraved in-house by the Disneyland Arcade Shop. Might have passed as good quality. Not Jimmy Vargas Eurolink die quality, but, good. The Tomorrowland single die machine was taken offstage, but never returned as three die machines became the standard around this time. Not closely similar to any other elongated coin, prototype or onstage. No stampbacked examples known. Our thanks to the very generous anony-mouse ParkPennies reader that offered to share this image with fellow collectors. (This Disneyland pressed coin number made with the possibly now canceled #DNP0046.0.0 obverse elongated coin die in its original "0" state / variation, paired with a blank "0" reverse coin die.) Larger prototype elongated coin image in frame or window # 1   2   3

DN0050 This number is an open chronological placeholder for a possible future coin.