Disneyland
Pressed
Coin News
Disneyland Pressed Coins! ParkPennies.com!
Coin Press
Machine
Locations

Disneyland Pressed Coin Guides, Locations & News!

DT Don's Tribute's
Disney Inspired Pressed Coins
by Don Cade

©2020-2021 ParkPennies

This "DT" Guide is dedicated to Don's Tributes, Disney inspired pressed coins that were designed and issued by Mr. Don Cade, the well known elongated coin collector. Given the nature of guide, like DW Disneyland Wannabes Guide, the DT Guide may not ever be totally complete, definitive or chronological as some coins may be randomly discovered / reported. However, this guide is a listing of all "DT" coins as they have become known to ParkPennies over the years. As Walt might might have said of this guide "This guide will never be completed. It will continue to grow as long as there is imagination left in the world." :-) If you have or know of any additional "DT" coins that should be listed here, you can help the guide grow.

Disney Themed Pressed Coin Tributes #DW0001-27
Disney Themed Pressed Coin Tributes #DW0028+
Don's Tributes Disney Inspired Coins #DT0001+
Honorable Mention Coins with Disney Spirit


Undated Pressed Penny Collector
Pressed Coins (2018)

DT0001P  DISNEYLAND, PRESSED PENNY COLLECTOR, WALT DISNEY WORLD pressed coin.DT0001P Horizontal elongated penny image, "∙ DISNEYLAND ∙, PRESSED PENNY COLLECTOR, ∙ DISNEY WORLD ∙ " with the designer / roller's initials "DC" just inside the wide wire border opposite the gripper notch. This nicely engraved pressed coin was commissioned and made by the well-known elongated coin collector and roller Donald Cade and was first reported in August of 2018. Because these coins were exclusively pressed and offered by the roller, they were never vended from a public coin press machine. The coin types pressed, per the records and best recollections of the roller, Don C., on this DT0001 "∙ DISNEYLAND∙, PRESSED PENNY COLLECTOR,∙ WALT DISNEY WORLD∙" die are: penny / cent, nickel, war nickel, dime, quarter, half dollar, SBA dollar, Presidential dollar, and 1/10 oz. silver bullion. However, some coin types may have been pressed only once as experimental test rolls. (This Disneyland pressed coin number made with The #DCT0001.0.0 obverse elongated coin die in its original "0" state / variation, paired with a blank "0" reverse coin die.) NOTE: Before a separate guide was opened for Don's Tribute coins, this coin die was listed as DW0044. This coin die : DT0001P DISNEYLAND, PRESSED PENNY COLLECTOR, WALT DISNEY WORLD pressed coin.
Larger elongated cent image in frame or window # 1    2    3
DT0001N nickel image Window # 1    2    3   DT0001D dime image Window # 1    2    3   DT0001Q quarter image Window # 1    2    3   DT0001H half dollar. Window # 1    2    3   DT0001DC Pres. dollar. window # 1    2    3   

 

2019 Pressed Penny Collector
Pressed Coins

DT0002P 2019 DISNEYLAND, PRESSED PENNY COLLECTOR, WALT DISNEY WORLD pressed coin.DT0002P Retired Horizontal elongated penny image, DISNEYLAND, PRESSED PENNY COLLECTOR, 2019, WALT DISNEY WORLD with the designer / roller's initials "DC" just inside the wide wire border opposite the gripper notch and a dot before and after the words "Disneyland" and "Walt Disney World". This nicely engraved pressed coin was commissioned and made by the well-known elongated coin collector and roller Donald Cade. The coin design was first rumored as a future coin on November 17, 2018 and first reported / acquired on December 7, 2018 as an update to his DT0001 2018 undated pressed coin set. On December 17, 2018 the DT0002 pressed coin die was reported broken. Accordingly, we have listed the DT0002 pressed coins as "Retired". A replacement die was engraved in early 2019 to make the DT0003 set coins which are very similar. However, the DT0003 pressed coins are engraved "Pressed Penny Collector" vs. "Pressed Coin Collector" and do not feature dots before and after the words "Disneyland" and "Walt Disney World". Because these coins were exclusively pressed and offered by the roller, they were never vended from a public coin press machine. The coin types pressed, per the records and best recollections of the roller, Don C., on this DT0002 "∙ DISNEYLAND∙, PRESSED PENNY COLLECTOR,∙ WALT DISNEY WORLD∙" die are: penny / cent, nickel, dime, quarter, half dollar, silver half, SBA dollar, Presidential dollar, Sacajawea dollar, and 1/10 oz. silver bullion. However, some coin types may have been pressed only once as experimental test rolls. (This Disneyland pressed coin number made with The #DCT0002.0.0 obverse elongated coin die in its original "0" state / variation, paired with a blank "0" reverse coin die.) NOTE: Before a separate guide was opened for Don's Tribute coins, this coin die was listed as DW0045. DT0002P DISNEYLAND, PRESSED PENNY COLLECTOR, WALT DISNEY WORLD pressed coin. Larger elongated cent image in frame or window # 1    2    3
DT0002N nickel image Window # 1    2    3   DT0002D dime image Window # 1    2    3  DT0002Q quarter image Window # 1    2    3   DT0002DC Pres. dollar image Window # 1    2    3   

 

2019 Pressed Penny Collector Pressed Coins
-Replacement Die-

DT0003P 2019 DISNEYLAND, PRESSED COIN  COLLECTOR, WALT DISNEY WORLD pressed coin.DT0003P Horizontal elongated penny image, DISNEYLAND, PRESSED COIN COLLECTOR, 2019, WALT DISNEY WORLD with the designer / roller's initials "DC" inside a break in the the wide wire border near the gripper notch. This DT0003 set was made as a replacement set after the DT0002 set die shaft shattered. Unlike the DT0002 set, the pressed coins in this DT0003 set read "Pressed Coin Collector" vs. "Pressed Penny Collector" and do not feature a dot before or after "Disneyland" or "Walt Disney World". These nicely engraved pressed coins were commissioned and made by the well-known elongated coin collector and roller Donald Cade. The coin design was first rumored as a future coin design in February of 2019 and first reported / acquired by ParkPennies.com on February 16, 2019. The coin die used to make this DT0003 coin set was canceled via addition of an added star as reported by Don C., the roller, on 11/19/2019. Because these coins were exclusively pressed and offered by the roller, they were never vended from a public coin press machine. The coin types pressed, per the records and best recollections of the roller, Don C., on this DT0003 "DISNEYLAND, PRESSED COIN COLLECTOR, 2019, WALT DISNEY WORLD" die are: penny / cent, nickel, dime, quarter, silver quarter, Sacajawea dollar, silver six pence, brass, and 1/10 oz. silver bullion. However, some coin types may have been pressed only once as experimental test rolls. (This Disneyland pressed coin number made with The #DCT0003.0.0 obverse elongated coin die in its original "0" state / variation, paired with a blank "0" reverse coin die.) NOTE: Before a separate guide was opened for Don's Tribute coins, this coin die was listed as DW0046. DT0003P DISNEYLAND, PRESSED COIN COLLECTOR, WALT DISNEY WORLD pressed coin. Larger elongated cent image in frame or window # 1    2    3
DT0003N nickel image Window # 1    2    3   DT0003D dime image Window # 1    2    3   DT0003SP George VI British Silver Sixpence (Rev.)   DT0003Q quarter image Window # 1    2    3    DT0003DC Pres. dollar image Window # 1    2    3    DT0003x Canceled Window # 1    2    3   

 

2019 Pressed Penny Collector Pressed Coins
-Second Replacement Die-

DT0004P 2019 DISNEYLAND, PRESSED COIN  COLLECTOR, WALT DISNEY WORLD pressed coin.DT0004P Horizontal elongated penny image, ∙ DISNEYLAND∙, PRESSED PENNY COLLECTOR, 2019, ∙ WALT DISNEY WORLD∙ with the designer / roller's initials "DC" inside a break in the the wide wire border near the gripper notch. This DT0004 set was made as the second 2019 replacement set after the DT0003 set. The DT0004 coins are easily attributable given the "Script" Disney-style lettering vs. the "Kingdom" Disney-style lettering used on the preceding DT0002 and DT0003 2019 dated coins. These nicely engraved pressed coins were commissioned and made by the well-known elongated coin collector and roller Donald Cade. Engraved by Tenibac-Graphion. This coin design was first reported in mid-October of 2019. The die was canceled in late 2019. Because these coins were exclusively pressed and offered by the roller, they were never vended from a public coin press machine. The coin types pressed, per the records and best recollections of the roller, Don C., on this DT0004 "∙ DISNEYLAND∙, PRESSED PENNY COLLECTOR,∙ WALT DISNEY WORLD∙" die are: penny / cent, steel penny, nickel, East Caribbean aluminum 5 cents, dime, Bahamian ten cent, quarter, Canadian steel quarter, Canadian silver quarter, SBA dollar, Sacajawea dollar, “brass-steel” Russian ruble, brass, nickel-sized sliver planchet and brass token. However, some coin types may have been pressed only once as experimental test rolls. (This Disneyland pressed coin number made with The #DCT0004.0.0 obverse elongated coin die in its original "0" state / variation, paired with a blank "0" reverse coin die.) NOTE: Before a separate guide was opened for Don's Tribute coins, this coin die was listed as DW0047. DT0004P DISNEYLAND, PRESSED COIN COLLECTOR, WALT DISNEY WORLD pressed coin. Larger elongated cent image in frame or window # 1    2    3
DT0004N nickel image Window # 1    2    3    DT0004D dime image Window # 1    2    3   DT0004Q quarter image Window # 1    2    3   DT0004DC Pres. dollar image Window # 1    2    3   DT0004X Canceled Die image Window # 1    2    3   

 

2020 Pressed Penny Collector
Pressed Coins

DT0005P  DISNEYLAND, PRESSED COIN  COLLECTOR, WALT DISNEY WORLD pressed coin.DT0005P Horizontal elongated penny image, ∙ DISNEYLAND∙, PRESSED PENNY COLLECTOR, ∙ WALT DISNEY WORLD∙ with the designer / roller's initials "DC" inside a break in the the wide wire border near the gripper notch. This DT0005 set and replaces the 2019 dated DT0004 set. The coins in the DT0005 set are easily attributable given the "Script or Brush" Disney-style lettering of "Pressed Penny Collector" vs. the "Kingdom" Disney-style lettering and the absence of a year date. These nicely engraved pressed coins were commissioned and made by the well-known elongated coin collector and roller Donald Cade. Engraved by Tenibac-Graphion. The DT0005 coin design was first reported in late December of 2019 by Michael H. Because these coins were exclusively pressed and offered by the roller, they were never vended from a public coin press machine. The coin types pressed are: penny / cent, nickel, dime, quarter, quarter, and dollar coin. However, some additional coin types may have been pressed as well as experimental test rolls. (This Disneyland pressed coin number made with The #DCT0005.0.0 obverse elongated coin die in its original "0" state / variation, paired with a blank "0" reverse coin die.) NOTE: Before a separate guide was opened for Don's Tribute coins, this coin die was listed as DW0048. DT0005P DISNEYLAND, PRESSED PENNY COLLECTOR, WALT DISNEY WORLD pressed coin. Larger elongated cent image in frame or window # 1    2    3
DT0005N nickel image Window # 1    2    3   DT0005D dime image Window # 1    2    3   DT0005Q quarter image Window # 1    2    3   DT0005DC dollar coin Window # 1    2    3   

 

2020 Disneyland COVID Shutdown
Pressed Coin Set

DT0006P DISNEYLAND, 2020, COVID SHUTDOWN pressed coin.DT0006P Horizontal elongated penny image, DISNEYLAND, 2020, COVID SHUTDOWN with the designer / roller's initials "DC" inside a break in the the dot border near the gripper notch. (Here a link to the Disneyland 2020 COVID 19 Shutdown artwork.) The coins in the DT0006 set were engraved and rolled by the well-known elongated coin collector Donald Cade. The DT0006 coin design was first reported in March of 2020 and the coins were publicly issued in April of 2020. At the time, Don said he wasn't happy with the engraving. However, in my opinion, the lettering style tells the story well. These historically tragic times are testing the people of the world as well as many businesses. Disney Resorts have even closed. But, when the pandemic has passed, I think this coin set will persist as a reminder not to take a day for granted. Because these coins were exclusively pressed and offered by the roller, they were never vended from a public coin press machine. The coin types known at the time of this writing are are: penny / cent, nickel, dime and quarter. However, some additional coin types may have been pressed for issue or as experimental test rolls. Large image of the DT0006P DISNEYLAND, 2020, COVID SHUTDOWN pressed coin set. (This Disneyland pressed coin number made with The #DCT0006.0.0 obverse elongated coin die in its original "0" state / variation, paired with a blank "0" reverse coin die.) NOTE: Before a separate guide was opened for Don's Tribute coins, this coin die was listed as DW0049. Larger elongated cent image in frame or window # 1    2    3
DT0006N nickel image Window # 1    2    3   DT0006D dime image Window # 1    2    3   DT0006Q quarter image Window # 1    2    3   

 

Mark Brown's
2020 Elongated Coin Business Card.

DT0007n Horizontal elongated nickel image, 20 ELONGATED COINS 20 DISNEYLAND WALT DISNEY WORLD, MARK BROWN, BUY SELL TRADEDT0007N Horizontal elongated nickel image, 20 ELONGATED COINS 20 DISNEYLAND WALT DISNEY WORLD, MARK BROWN, BUY SELL TRADE, XXX@XXX.XXX in a Disney-style brush script typeface, wide wire border, letters "DC" near the coin grip for Donald Cade, the roller of the coins. (Mark's email address blurred to protect the innocent. :-) Engraved by Tenibac-Graphion. Reported 5/2020. Because these coins were exclusively engraved, rolled and distributed by the well-known collector Mark Brown the coins were never vended from a public coin press machine. The coin type / denomination known at the time of this writing is exclusively nickel. However, additional coin types may have been or may be rolled experimentally or for distribution. Larger image of the DT0007n 20 ELONGATED COINS 20 DISNEYLAND WALT DISNEY WORLD, MARK BROWN, BUY SELL TRADE elongated coin. (This Disneyland pressed coin number made with The #DCT0007.0.0 obverse elongated coin die in its original "0" state / variation, paired with a blank "0" reverse coin die.) NOTE: Before a separate guide was opened for Don's Tribute coins, this coin die was listed as DW0050. Larger elongated nickel image in frame or window # 1    2    3   

 

Donald Cade's
2020 Elongated Coin Business Card.

DT0008P Horizontal elongated penny image, 20 ELONGATED COINS 20 DISNEYLAND WALT DISNEY WORLD, DONALD CADE, BUY SELL TRADE.DT0008P Horizontal elongated penny image, 20 ELONGATED COINS 20 DISNEYLAND WALT DISNEY WORLD, DONALD CADE, BUY SELL TRADE, XXX@XXX.XXX in a Disney-style brush script typeface, wide wire border. (Don's email address blurred to protect the innocent. :-) Donald Cade was the roller of these coins which were engraved by Tenibac-Graphion. Reported 5/2020. Because these coins were exclusively engraved, rolled and distributed by the well-known collector Donald Cade, these coins were never vended from a public coin press machine. The coin types known at the time of this writing are are: penny / cent, nickel, dime and quarter. However, some additional coin types may have been pressed for issue or as experimental test rolls. Larger image of the DT0008P Horizontal elongated penny image, 20 ELONGATED COINS 20 DISNEYLAND WALT DISNEY WORLD, DONALD CADE, BUY SELL TRADE. (This Disneyland pressed coin number made with The #DCT0008.0.0 obverse elongated coin die in its original "0" state / variation, paired with a blank "0" reverse coin die.) NOTE: Before a separate guide was opened for Don's Tribute coins, this coin die was listed as DW0051. Larger elongated cent image in frame or window # 1    2    3  
DT0008P penny image Window # 1    2    3   DT0008N nickel image Window # 1    2    3   DT0008D dime image Window # 1    2    3   DT0008Q quarter image Window # 1    2    3  


 

Remembering Maelstrom,
The High Seas Norwegian Adventure

DT0009P Horizontal elongated penny image, Remembering Maelstrom a high seas Norwegian tribute.DT0009P Horizontal elongated penny image, MAELSTROM, A HIGH SEAS NORWEGIAN TRIBUTE, Malestrom logo, no border, letters "DC" near the coin grip for Donald Cade. This set of coins also features a backstamp "∙ DISNEYLAND∙, PRESSED PENNY COLLECTOR,∙ WALT DISNEY WORLD∙ ", which has also been reported in use as a stand alone obverse die. (Although blank back coins are known.) Issued in memory of the Walt Disney World Maelstrom ride, July 5, 1988 to October 5, 2014 which was replaced by the Frozen Backstamp "∙ DISNEYLAND∙, PRESSED PENNY COLLECTOR,∙ WALT DISNEY WORLD∙"Ever After attraction. Reported around 8/2020. Because these coins were exclusively engraved, rolled and distributed by the well-known collector Donald Cade, this coin set was never vended from a public coin press machine. Engraved by C&J Engraving. The pressed coin types known at the time of this writing are are: penny / cent, steel cent, nickel, dime and quarter. However, some additional coin types may have been pressed for issue or as experimental test rolls. Larger image of the DT0009P Horizontal elongated penny image, MAELSTROM, A HIGH SEAS NORWEGIAN TRIBUTE. (This Disneyland pressed coin number made with The #DCT0009.0.1 obverse elongated coin die in its original "0" state / variation, paired with a "Disneyland Pressed Penny Collector Walt Disney World" reverse coin die.) Larger elongated cent image in frame or window # 1    2    3  
DT0009P penny image Window # 1    2    3   DT0009SP steel penny image Window # 1    2    3   DT0009N nickel image Window # 1    2    3   DT0009D dime image Window # 1    2    3   DT0009Q quarter image Window # 1    2    3  

 

Honoring Walt Disney World's PeopleMover
Pressed Coin

DT0010P Horizontal pressed coin image, Honoring the Disney PeopleMover.DT0010P Horizontal elongated penny image, PAGING MR MORROW, ELONGATED COLLECTION,∙ PEOPLEMOVER∙, MR. TOM MORROW, PeopleMover logo, no border, letters "DC" near the coin grip for Donald Cade. This set of coins also features a backstamp: "∙ DISNEYLAND∙, PRESSED PENNY COLLECTOR,∙ WALT DISNEY WORLD∙ ", which has also been reported in use as a stand alone obverse die. (Although blank back coins are known.) Issued in honor of the beloved Walt Disney World PeopleMover attraction and the ride Backstamp "∙ DISNEYLAND∙, PRESSED PENNY COLLECTOR,∙ WALT DISNEY WORLD∙"announcement "Paging Mr. Morrow". Reported around 8/2020. Because these coins were exclusively engraved, rolled and distributed by the well-known collector Donald Cade, they were never vended from a public coin press machine. Engraved by C&J Engraving. The pressed coin types known at the time of this writing are are: penny / cent, steel cent, nickel, dime and quarter. However, some additional coin types may have been pressed for issue or as experimental test rolls. Larger image of the DT0010P Horizontal elongated penny image, PAGING MR MORROW, ELONGATED COLLECTION,∙ PEOPLEMOVER∙, MR. TOM MORROW. (This Disneyland pressed coin number made with The #DCT0010.0.1 obverse elongated coin die in its original "0" state / variation, paired with a "Disneyland Pressed Penny Collector Walt Disney World" reverse coin die.) Larger elongated cent image in frame or window # 1    2    3  
DT0010P penny image Window # 1    2    3   DT0010SP steel penny image Window # 1    2    3   DT0010N nickel image Window # 1    2    3   DT0010D dime image Window # 1    2    3   DT0010Q quarter image Window # 1    2    3  

 

Remembering The Disney Skyway Attraction
Pressed Coin

DT0011P Vertical pressed coin image, Remembering the Disney SkywayDT0011P Vertical elongated penny image, SKYWAY stylized image of the Disney Skyway attraction , SKYWAY, wide wire border, letters "DC" near the coin grip for Donald Cade. This set of coins also features a backstamp: "∙ DISNEYLAND∙, PRESSED PENNY COLLECTOR,∙ WALT DISNEY WORLD∙ ", which has also been reported in use as a stand alone obverse die. (Although blank back coins are known.) Issued in memory of the beloved Disney Skyway "Bucket Ride" attraction (Disneyland June 23, 1956 to November 9, 1994, Walt Disney World October 1, 1971 to November 10, 1999, andBackstamp "∙ DISNEYLAND∙, PRESSED PENNY COLLECTOR,∙ WALT DISNEY WORLD∙"Tokyo Disneyland April 15, 1983 to November 3, 1998.) Reported around 8/2020. Because these coins were exclusively engraved, rolled and distributed by the well-known collector Donald Cade, they were never vended from a public coin press machine. Engraved by C&J Engraving. The pressed coin types known at the time of this writing are are: penny / cent, steel cent, nickel, dime and quarter. However, some additional coin types may have been pressed for issue or as experimental test rolls. Larger image of the DT0011P Vertical elongated penny image, featuring a stylized image of the Disney Skyway attraction. (This Disneyland pressed coin number made with The #DCT0011.0.1 obverse elongated coin die in its original "0" state / variation, paired with a "Disneyland Pressed Penny Collector Walt Disney World" reverse coin die.) Larger elongated cent image in frame or window # 1    2    3  
DT0011P penny image Window # 1    2    3   DT0011SP steel penny image Window # 1    2    3   DT0011N nickel image Window # 1    2    3   DT0011D dime image Window # 1    2    3   DT0011Q quarter image Window # 1    2    3  

 

Splash Mountain Re-Imagined
Pressed Coin

DT0012P Horizontal pressed coin image, Splash Mountain re-imaginedDT0012P Horizontal elongated penny image, LEAVING THE LAUGHING PLACE stylized image of Splash Mountain, wide wire border, letters "DC" near the coin grip for Donald Cade. This set of coins also features a backstamp: "∙ DISNEYLAND∙, PRESSED PENNY COLLECTOR,∙ WALT DISNEY WORLD∙ ", which has also been reported in use as a stand alone obverse die. (Although blank back coins are known.) Issued in recognition of the re-imagining of Disney's Splash Mountain Attraction. Reported around 8/2020. Because these Backstamp "∙ DISNEYLAND∙, PRESSED PENNY COLLECTOR,∙ WALT DISNEY WORLD∙"coins were exclusively engraved, rolled and distributed by the well-known collector Donald Cade, they were never vended from a public coin press machine. Engraved by C&J Engraving. The pressed coin types known at the time of this writing are are: penny / cent, nickel, dime and quarter. However, some additional coin types may have been pressed for issue or as experimental test rolls. Larger image of the DT0012P Horizontal elongated penny image, featuring a stylized image of the Disney Skyway attraction. (This Disneyland pressed coin number made with The #DCT0012.0.1 obverse elongated coin die in its original "0" state / variation, paired with a "Disneyland Pressed Penny Collector Walt Disney World" reverse coin die.) Larger elongated cent image in frame or window # 1    2    3  
DT0012P penny image Window # 1    2    3   DT0012N nickel image Window # 1    2    3   DT0012D dime image Window # 1    2    3   DT0012Q quarter image Window # 1    2    3  

 

The Storybook Land Canal Boat Attraction
Pressed Coin

DT0013P Issued in honor of the beloved Disney Storybook Land Canal Boat attractionDT0013P Retired Vertical elongated penny image, Storybook Land stylized image of Storybook Land's Monstro the Whale and a canal boat entering his open mouth, STORYBOOK LAND, wide wire border, letters "DC" near the coin grip for Donald Cade. This set of coins also features a backstamp: "∙ DISNEYLAND∙, PRESSED PENNY COLLECTOR,∙ WALT DISNEY WORLD∙ ", which has also been reported in use as a stand alone obverse die. (Although blank back coins are known.) Issued in honor of the beloved Disney Storybook Land Canal Boat attraction which was first introduced at Disneyland on opening day, July 17, 1955. Coin set reported around 12/2020 and canceled via an "X" above Monstro shortly after due to a small error in the first "o" of Storybook. Yes, it is a very small bump at the top of the letter, but Don is a perfectionist. This very limited coin also features a "Pressed Penny Collector" backstamp vs. the DT0014's backstamp "Pressed Coin Collector" backstamp. DT0013p Disneyland Pressed Penny Collector Walt Disney World backstampBecause these coins were exclusively engraved, rolled and distributed by the well-known collector Donald Cade, they were never vended from a public coin press machine. Engraved by C&J Engraving. The pressed coin types known at the time of this writing are are:penny / cent, nickel, dime and quarter. However, some additional coin types may have been pressed for issue or as experimental test rolls. Larger image of the DT0013P Vertical elongated penny image, featuring Monstro the Whale and a Storybook Land canal boat. (This Disneyland pressed coin number made with The #DCT0013.0.1 obverse elongated coin die in its original "0" state / variation, paired with a "Disneyland Pressed Penny Collector Walt Disney World" reverse coin die.) Larger elongated cent image in frame or window # 1    2    3  
DT0013P penny image Window # 1    2    3     DT0013N nickel image Window # 1    2    3    DT0013D dime image Window # 1    2    3     DT0013Q quarter image Window # 1    2    3  

The Storybook Land Canal Boat Attraction
Replacement Pressed Coin

DT0014P Issued in honor of the beloved Disney Storybook Land Canal Boat attraction. (Replacement coin.)DT0014P Vertical elongated penny image, Storybook Land stylized image of Storybook Land's Monstro the Whale and a canal boat entering his open mouth, STORYBOOK LAND, wide wire border, letters "DC" near the coin grip for Donald Cade. This set of coins also features a backstamp: "DISNEYLAND, PRESSED COIN COLLECTOR, WALT DISNEY WORLD " which has also been reported in use as a stand alone obverse die. (Although blank back coins are known.) Issued in honor of the beloved Disney Storybook Land Canal Boat attraction which was first introduced at Disneyland on opening day, July 17, 1955. This corrected coin set reported around 1/2021. As a corrected replacement coin for the DT0013, it features a corrected letter "o" in Storybook and a "Pressed Coin Collector" backstamp vs. the scarce DT0013's "Pressed Penny Collector" backstamp. Yes, it was a very small change, but Don is a perfectionist. DT0014p Disneyland Pressed Coin Collector Walt Disney World backstamp. Because these coins were exclusively engraved, rolled and distributed by the well-known collector Donald Cade, they were never vended from a public coin press machine. Engraved by C&J Engraving. The pressed coin types known at the time of this writing are are: penny / cent, nickel, dime and quarter. However, some additional coin types may have been pressed for issue or as experimental test rolls. Larger image of the DT0014P Vertical elongated penny image, featuring Monstro the Whale and a Storybook Land canal boat. (This Disneyland pressed coin number made with The #DCT0014.0.1 obverse elongated coin die in its original "0" state / variation, paired with a "Disneyland Pressed Coin Collector Walt Disney World" reverse coin die.) Larger elongated cent image in frame or window # 1    2    3  
DT0014P penny image Window # 1    2    3     DT0014N nickel image Window # 1    2    3    DT0014D dime image Window # 1    2    3     DT0014Q quarter image Window # 1    2    3  

The Disney Monorail
Pressed Coin

DT0015P Issued in honor of the Disney Monorail attractionDT0015P Retired Horizontal elongated penny image, Disney's Monorail Attraction. In the style of the Monorail greeting / warning signs: "PLEASE STAND CLEAR, OF THE DOORS", stylized image of a Disney Monorail, "POR FAVOR MANTENGANESE, ALEJADO DE LAS PUERTAS", no border, letters "DC" near the coin grip for Donald Cade. The DT0018 set revises the spelling of MANTENGANESE to MANTENGASE to conform with the Disney monorail signage and changes to backstamp to "...Pressed Coin Collector...". This set of coins also features a backstamp: "∙ DISNEYLAND∙, PRESSED PENNY COLLECTOR,∙ WALT DISNEY WORLD∙" which has also been reported in use as a stand alone obverse die. (Although blank back coins are known.) This coin set was issued in honor of the Disney Monorail attraction which was first introduced at Disneyland on June 14, 1959 and WDW on opening day, October 1, 1971. Coin set reported around 1/2021. DT0015p Disneyland Pressed Penny Collector Walt Disney World backstampBecause these coins were exclusively engraved, rolled and distributed by the well-known collector Donald Cade, they were never vended from a public coin press machine. Engraved by C&J Engraving. The pressed coin types known at the time of this writing are are: penny / cent, nickel, dime and quarter. However, some additional coin types may have been pressed for issue or as experimental test rolls. Larger image of the DT0015P horizontal elongated penny image, featuring the Disney monorail. (This Disneyland pressed coin number made with The #DCT0015.0.1 obverse elongated coin die in its original "0" state / variation, paired with a "∙ DISNEYLAND∙, PRESSED PENNY COLLECTOR,∙ WALT DISNEY WORLD∙" reverse coin die.) Larger elongated cent image in frame or window # 1    2    3  
DT0015P penny image Window # 1    2    3     DT0015N nickel image Window # 1    2    3    DT0015D dime image Window # 1    2    3     DT0015Q quarter image Window # 1    2    3  

 

The Rocket Rods
Pressed Coin

DT0016P Issued in honor of the Rocket Rods attractionDT0016P Horizontal elongated penny image, Rocket Rods Attraction. Rocket Rods logo, PRESS YOUR WAY TO TOMORROW, no border, letters "DC" near the coin grip for Donald Cade. This set of coins also features a backstamp: "∙ DISNEYLAND∙, PRESSED PENNY COLLECTOR,∙ WALT DISNEY WORLD∙ " which has also been reported in use as a stand alone obverse die. (Although blank back coins are known.) The coin design honors of the Disney Monorail attraction which was first introduced at Disneyland on June 14, 1959 and WDW on opening day, October 1, 1971. The coin set was reported around 1/2021. DT0016p Disneyland Pressed Penny Collector Walt Disney World backstampBecause these coins were exclusively engraved, rolled and distributed by the well-known collector Donald Cade, they were never vended from a public coin press machine. Engraved by C&J Engraving. The pressed coin types known at the time of this writing are are: penny / cent, nickel, dime and quarter. However, some additional coin types may have been pressed for issue or as experimental test rolls. Larger image of the DT0016P horizontal elongated penny image, featuring a tribute to the Disneyland Rocket Rods. (This Disneyland pressed coin number made with The #DCT0016.0.1 obverse elongated coin die in its original "0" state / variation, paired with a "∙ DISNEYLAND∙, PRESSED PENNY COLLECTOR,∙ WALT DISNEY WORLD∙" reverse coin die.) Larger Disneyland Rocket Rods pressed coin image in frame or window # 1    2    3  
DT0016P penny image Window # 1    2    3     DT0016N nickel image Window # 1    2    3    DT0016D dime image Window # 1    2    3     DT0016Q quarter image Window # 1    2    3  

 

2021 Pressed Penny Collector
Pressed Coin Business Card

DT0017P 2021 DISNEYLAND, PRESSED COIN  COLLECTOR, WALT DISNEY WORLD pressed coin.DT0017P Horizontal elongated penny image, DISNEYLAND, PRESSED COIN COLLECTOR, 2021, WALT DISNEY WORLD with a Mickey symbol before and after "2021". The designer / roller's initials "DC" are near the gripper notch. This pressed coin collector pressed coin was commissioned and rolled by the well-known elongated coin collector and roller Donald Cade. The coin design was first reported to ParkPennies in January of 2021. Because these coins were exclusively pressed and offered by the roller, they were never vended from a public coin press machine. Engraved by C&J Engraving. The pressed coin types known at the time of this writing are are: penny / cent, nickel, dime and quarter. However, some additional coin types may have been pressed for issue or as experimental test rolls. (This Disneyland pressed coin number made with The #DCT0017.0.0 obverse elongated coin die in its original "0" state / variation, paired with a blank "0" reverse coin die.) Here is a link to a larger image of this DT0017P DISNEYLAND, PRESSED COIN COLLECTOR, WALT DISNEY WORLD pressed coin or in frame / window # 1    2    3
DT0017P penny image Window # 1    2    3     DT0017N nickel image Window # 1    2    3   DT0017D dime image Window # 1    2    3      DT0017Q quarter image Window # 1    2    3    

 

The Disney Monorail
Replacement Pressed Coin

DT0018P Issued in honor of the Disney Monorail attractionDT0018P Horizontal elongated penny image, Disney's Monorail Attraction replacement coin. In the style of the Monorail greeting / warning signs: "PLEASE STAND CLEAR, OF THE DOORS", stylized image of a Disney Monorail, "POR FAVOR MANTENGASE, ALEJADO DE LAS PUERTAS", no border, letters "DC" near the coin grip for Donald Cade. Same design as the DT0015 set with a change in the Spanish language word from MANTENGANESE to MANTENGASE to match the Disney monorail signage and a change in the backstamp from "...Pressed Penny Collector..." to "...Pressed Coin Collector...". (Blank back coins are also known.) This set of coins features a backstamp: "DISNEYLAND, PRESSED COIN COLLECTOR, WALT DISNEY WORLD" which has also been reported in use as a stand alone obverse die. This coin set was issued in honor of the Disney Monorail attraction which was first introduced at Disneyland on June 14, 1959 and WDW on opening day, October 1, 1971. Coin set reported late 1/2021. DT0018p Disneyland Pressed Penny Collector Walt Disney World backstampBecause these coins were exclusively engraved, rolled and distributed by the well-known collector Donald Cade, they were never vended from a public coin press machine. Engraved by C&J Engraving. The pressed coin types known at the time of this writing are are: penny / cent, nickel, dime, quarter and Presidential dollar coin. However, some additional coin types may have been pressed for issue or as experimental test rolls. Larger image of the DT0018P horizontal elongated penny image, featuring the Disney monorail. (This Disneyland pressed coin number made with The #DCT0018.0.1 obverse elongated coin die in its original "0" state / variation, paired with a "Disneyland Pressed Coin Collector Walt Disney World" reverse coin die.) Larger elongated cent image in frame or window # 1    2    3  
DT0018P penny image Window # 1    2    3     DT0018N nickel image Window # 1    2    3    DT0018D dime image Window # 1    2    3    DT0018Q quarter image  Window # 1    2    3       DT0018DC Presidential dollar image Window # 1    2    3  

 

The ZZZCoins.com
Disney Monorail Elongated Coins

DT0019P Horizontal elongated penny image, commissioned by ZZZ Coins / www.ZZZCOINS.com  in honor of the Disney Monorail attraction.DT0019P Horizontal elongated penny image, Disney's Monorail Attraction by www.ZZZCoins.com. In the style of the Monorail greeting / warning signs: "PLEASE STAND CLEAR, OF THE DOORS", stylized image of a Disney Monorail, "POR FAVOR MANTENGASE, ALEJADO DE LAS PUERTAS", no border, letters "DC" near the coin grip for Donald Cade. Same design as the DT0018 set. However the DT0019 set features a special backstamp: "Disney World, Elongated Coins, ZZZCOINS.COM, Disneyland" and ZZZCoins reports that the run was limited to 300 coins and will not be extended. (Future business card elongates from ZZZCoins using this backstamp will feature a different obverse.) Coins in this set were commissioned by ZZZCOINS.com in honor of the Disney Monorail attraction which was first introduced at Disneyland on June 14, 1959 and WDW on opening day, October 1, 1971. Coin set reported late 1/2021. DT0019p Disney World, Elongated Coins, ZZZCOINS.COM, DisneylandBecause these coins were exclusively engraved and pressed for the good folks at ZZZ Coins, they were never vended from a public coin press machine. Engraved by C&J Engraving. The pressed coin types known at the time of this writing are are: penny / cent, nickel, dime, and quarter. However, some additional coin types may have been pressed for issue or as experimental test rolls. Larger image of the DT0019P horizontal elongated penny image, featuring the Disney monorail. (This Disneyland pressed coin number made with The #DCT0019.0.2 obverse elongated coin die in its original "0" state / variation, paired with this coin's "2" or second reverse coin die, "Disney World, Elongated Coins, ZZZCOINS.COM, Disneyland" reverse coin die.) Larger elongated cent image in frame or window # 1    2    3   See a YouTube video about this coin set at DAVIDS COIN TRAVELS
DT0019P penny image Window # 1    2    3     DT0019N nickel image Window # 1    2    3    DT0019D dime image Window # 1    2    3     DT0019Q quarter image Window # 1    2    3         

 
 

The Mulholland Madness
Pressed Coin

DT0020P This pressed coin set was issued in honor of Disney's Mulholland Madness "Mad Mouse" Attraction.DT0020P Horizontal elongated penny image, Disney's Mulholland Madness "Mad Mouse" Attraction coin. In the style of the Mulholland Madness attraction sign this pressed coin reads: "Mulholland Madness", no border, letters "DC" near the coin grip for Donald Cade. This set of coins features a backstamp: "DISNEYLAND, PRESSED COIN COLLECTOR, WALT DISNEY WORLD" which is shared with some other coins in this series and has also been reported in use as a stand alone obverse die. (Blank back coins are also known.) This elongated coin set was issued in honor of the early Disney's California Adventure attraction which was first introduced at at the opening of DCA and later renamed Goofy's Sky School. First reported in March of 2021. DT0020p Disneyland Pressed Penny Collector Walt Disney World backstampBecause these coins were exclusively engraved, rolled and distributed by the well-known collector Donald Cade, they were never vended from a public coin press machine. Engraved by C&J Engraving. The pressed coin types known at the time of this writing are are: penny / cent, nickel, dime and quarter coin. However, some additional coin types may have been pressed for issue or as experimental test rolls. Larger image of the DT0020P horizontal elongated penny image, featuring the Mulholland Madness attraction logo. (This Disneyland pressed coin number made with The #DCT0020.0.1 obverse elongated coin die in its original "0" state / variation, paired with a "Disneyland Pressed Coin Collector Walt Disney World" reverse coin die.) Larger elongated cent image in frame or window # 1    2    3  
DT0020P penny image Window # 1    2    3     DT0020N nickel image Window # 1    2    3    DT0020D dime image Window # 1    2    3    DT0020Q quarter image  Window # 1    2    3
 

The Superstar Limo
Pressed Coin

DT0021P This pressed coin set was issued in honor of the DCA Superstar Limo Attraction.DT0021P Horizontal elongated penny image, Superstar Limo Attraction coin. In the style of the Superstar Limo attraction sign / logo this pressed coin reads: "Superstar Limo", no border, letters "DC" near the coin grip for Donald Cade. This set of coins features a backstamp: "DISNEYLAND, PRESSED COIN COLLECTOR, WALT DISNEY WORLD" which is shared with some other coins in this series and has also been reported in use as a stand alone obverse die. (Blank back coins are also known.) This elongated coin set was issued in honor of the early Disney's California Adventure attraction which was first introduced at at the opening of DCA and later was re-imagined as Monsters Inc. First reported in March of 2021. DT0021p Disneyland Pressed Penny Collector Walt Disney World backstampBecause these coins were exclusively engraved, rolled and distributed by the well-known collector Donald Cade, they were never vended from a public coin press machine. Engraved by C&J Engraving. The pressed coin types known at the time of this writing are are: penny / cent, nickel, dime and quarter coin. However, some additional coin types may have been pressed for issue or as experimental test rolls. Larger image of the DT0021P horizontal elongated penny image, featuring the Superstar Limo attraction logo. (This Disneyland pressed coin number made with The #DCT0021.0.1 obverse elongated coin die in its original "0" state / variation, paired with a "Disneyland Pressed Coin Collector Walt Disney World" reverse coin die.) Larger elongated cent image in frame or window # 1    2    3  
DT0021P penny image Window # 1    2    3     DT0021N nickel image Window # 1    2    3    DT0021D dime image Window # 1    2    3    DT0021Q quarter image  Window # 1    2    3
 

The Maliboomer
Pressed Coin

DT0022P This pressed coin set was issued in honor of the DCA Maliboomer Attraction.DT0022P Horizontal elongated penny image, Maliboomer Attraction coin. In the style of the Maliboomer attraction sign / logo this pressed coin reads: "Maliboomer", no border, letters "DC" near the coin grip for Donald Cade. It has "Boomer" in the name!! :-) This set of coins features a backstamp: "∙ DISNEYLAND∙, PRESSED PENNY COLLECTOR,∙ WALT DISNEY WORLD∙ " which is shared with some other coins in this series. This backstamp design has also been reported in use as a stand alone obverse die. (Blank back coins are also known.) This elongated coin set was issued in honor of the early Disney's California Adventure attraction which was first introduced at at the opening of DCA and removed from stage to make room for Inside Out Emotional Whirlwind attraction. First reported in March of 2021. DT0022p Disneyland Pressed Penny Collector Walt Disney World backstampBecause these coins were exclusively engraved, rolled and distributed by the well-known collector Donald Cade, they were never vended from a public coin press machine. Engraved by C&J Engraving. The pressed coin types known at the time of this writing are are: penny / cent, nickel, dime and quarter coin. However, some additional coin types may have been pressed for issue or as experimental test rolls. Larger image of the DT0022P horizontal elongated penny image, featuring the Maliboomer attraction logo. (This Disneyland pressed coin number made with The #DCT0022.0.1 obverse elongated coin die in its original "0" state / variation, paired with a "Disneyland Pressed Coin Collector Walt Disney World" reverse coin die.) Larger elongated cent image in frame or window # 1    2    3  
DT0022P penny image Window # 1    2    3     DT0022N nickel image Window # 1    2    3    DT0022D dime image Window # 1    2    3    DT0022Q quarter image  Window # 1    2    3
 
Current list of all coins reported as of 3/14/21. Most often the list is current between updates.
If you own a coin not yet listed, please contact ParkPennies.com.
 
Please use this link for an Introduction to the DL Disneyland Park Elongated Coin Collection and this link for an Introduction to all Disneyland Resort Elongated Coin Collections.
Editor's note: We are often reminded that the preferred numismatic term is "Elongated Coins". However, as the rebellious, risk taking, devil may care ParkPennies.com contributors that we are, temptation often gets the better of us. As a result, you may see the more casual, terms like: stamped coins, pressed coins, pressed nickels, pressed dimes, pressed quarters, smashed pennies, flattened pennies, crushed pennies, squashed pennies, rolled pennies, mashed pennies, stamped pennies, smushed pennies, stretched pennies, memory pennies, keepsake pennies, flattened pennies, and souvenir coin medallions to describe these fun pressed coin souvenirs. :-) Here are some pages about the often asked questions of How many pressed coins are at Disney? and How much do pressed coins cost? Just for fun, here is a page with a bit of a different take on Pressed Coins Facts and Fiction with tips on how different coins press, cool pressed coin jewelry, early penny presses... Happy Collecting! Boomer and the folks at ParkPennies.com :-)
 
Disney Themed Pressed Coin Tributes #DW0001-27
Disney Themed Pressed Coin Tributes #DW0028+
Don's Tributes Disney Inspired Coins #DT0001+
Honorable Mention Coins with Disney Spirit
 
 
TOP of Page Pressed Coin Frames? (Info)   ON   OFF

Our Friendly "No Cookies" and Privacy Policies (Here).